Futon. Thursday , October 12th , 2017 - 14:52:22 PM
There are a few things that you need to consider if you are looking for a futon. What is my frame made of? How long will my frame last? Always look for a futon frame that is made from solid hardwoods, avoid any frames that are made from particle board or MDF. Measure width and the distance between the slats on the back and seat decks. Slats should be at least two and a half inches wide and if the spacing is more than three inches, forget it.
Early designs involved a steel tooth design that would fit into pocket welds on the arms. These would snap off over use. The alternative design was to run a bolt through the arms and into the rails. While better it still did not address the issue of bending stretcher rails. Bent hinges also added another issue that would happen from use over time. While not as common as the other problems this issue still led to the failure of many black metal frames.
Natural fibers, cotton and linen are nice and soft to begin with, but can wear faster than synthetics. Synthetic fibers; polyester, nylon, rayon and such; might not be quite as soft but they last longer than natural fibers. Synthetic fibers have come a long way, they are constantly being improved and they hold vivid dyes that cotton and linen cant. A good compromise between Natural and Synthetic fibers is blends of the two, which are in abundance in the futon cover market.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Hilosylanas claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.